Calcium Oxide desiccant 10g

Product Introduction

Calcium oxide + color changing silica gel

Applicable Industries

Widely used in security products, auto parts, mechanical hardware, instrumentation, digital products, semiconductors and other industries.

Features and advantages

Features

1. Adhesive desiccant with 3M glue, can be pasted.

2. High moisture absorption rate: In the environment of 25°C and 90% relative humidity, the saturated moisture absorption rate is ≥50%, which can prevent equipment failures caused by high humidity.

3.  High moisture absorption in low-humidity environment of 25°C and 50% relative humidity, the moisture absorption rate reaches 30% in 48 hours. It also has a good effect on moisture-proofing equipment in low-humidity environment.

4. Safe and stable: physical adsorption, stable raw material structure, moisture absorption and water locking, no leakage, no expansion, no deformation, no explosion, and can stably maintain the moisture absorption effect.

5. Wide applicable temperature: from 0℃ to 100℃, and it can absorb the moisture in various environments.

6. Long duration: long shelf life of continuous moisture absorption for more than 2 years.

Using Methods and precautions

1. Use a dry container for sealing and packaging. The desiccant should be placed in an appropriate part of the packaging container. Try to ensure that all sealed spaces are absorbed by the desiccant. To protect valuable materials, the amount of desiccant should be increased, and multi-layer packaging can be used if necessary.
2. Before using calcium oxide desiccant, you should check its appearance. If deformation, cracks, damage, etc. are found, the desiccant should be replaced to ensure its moisture absorption effect.
3.  Calcium oxide desiccant is harmless to the human body and the environment, but it is still recommended not to directly contact the skin and inhale desiccant powder to avoid discomfort.
4. When using calcium oxide desiccant, you need to pay attention to regularly checking the moisture absorption of the desiccant. If you find moisture absorption, discoloration and saturation, the desiccant needs to be replaced in time.